PAX S80 - Keys Injection

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 196
6.7.7 Keys Injection
Note
Use this function to enter the Key Load sub application.
STEP
ACTION
DISPLAY
1.
From the System Settings menu, press [7] to
Select the Keys Injection.
2.
Input the Password and press [ENTER]
3.
Press [1] or [2] to enter the function:
[1] Will start the Key Injection process, after you
see the screen in step 4 then skip to step #7.
[2] If you need to set baud rate, skip to step #5.
4.
Session Started
5.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
6.
After setting the baud rate return to step 3 in this process.
7.
Stop.
SYSTEM OPTIONS:
4. Pre-Dial Call
5. Database
6. Pin Pad Settings
7. Keys Injection
KEY INJECT
1. Start
2. Set Baudrate
ENTER PASSWORD:
KEY INJECT
Receiving…
BaudRate 1200
1. Set to 1200
2. Set to 2400
3. Set to 4800
4. Set to 9600