PAX S80 - Local Dup Check

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 187
6.7.3.3 Local Dup Check
Note
This feature will notify the user when there are duplicated
transactions of the same amount and same card account number.
STEP
ACTION
DISPLAY
1.
From the Main Menu, press [5] for System Settings
2.
Press [3] for Working Mode.
3.
Press [3] for Local Dup Check.
4.
If the security for Card Manual Entry is on, the
terminal will prompt for the manager password.
When prompted, enter the password and then
press [ENTER].
5.
The default setting is OFF.
Press [1] to disable Clerk ID mode.
OR
Press [2] to enable Clerk ID Mode.
6.
STOP.
SYSTEM OPTIONS:
1. Date/Time Setup
2. Batch Number
3. Working Mode
4. Pre-Dial Call
MAIN MENU:
2. Merchant Settings
3. Operation Settings
4. Hosts Settings
5. System Settings
WORKING MODE:
1. Tip Options
2. Fraud Control
3. Local Dup Check
ENTER PASSWORD:
Dup Check : 1
1. OFF
2. ON