PAX S80 - Card Types

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 124
6.4.1.2 Card Types
Note
This function allows the user to enable or disable specific card types,
such as Visa, MasterCard and American Express.
Example: We are not set up to accept American Express cards but
sometimes my cashier takes them by mistake, which is a problem.
Disable the AMEX card type and the terminal will post an error as soon
as the card is swiped.
STEP
ACTION
DISPLAY
1.
From the Merchant Settings menu, press [1] to
access Authorizations
2.
Input the Password and press [ENTER]
3.
Press [2] to edit authorization for Card Types
4.
Use the [▲] & [▼] keys to select the Card Type
then press [ENTER].
OR, Press the number corresponding with your
selection
5.
Scroll to select Enable or Disable for Card Type
then press [ENTER].
OR
Press the number corresponding with your
selection.
* A ‘+’ indicates the
card type is enabled and a
‘-‘indicates disabled.
6.
Stop.
Choose Card Type
1. Visa +
2. MasterCard +
3. AMEX +
4. DCI-DISC +
Visa +
1. Disabled
2. Always Enabled
MERCHANT PARAMS:
1. Authorizations
2. Security Settings
3. Edit Header
4. Edit Trailer
ENTER PASSWORD:
AUTHORIZATION
1. Trans. Types
2. Card Types
3. Debit Prompt