PAX S80 - Host Parameters

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 161
6.6.1 Host Parameters
Note
This function is used for editing host parameters.
STEP
ACTION
DISPLAY
1.
From the Hosts Settings menu press [1] to enter
Host parameters.
2.
Input the Password and press [ENTER].
3.
Scroll to select the host then press [ENTER].
Note: If the Host is MPSTC, it will display MPSTC.
4.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
5.
Input the Merchant ID if [1] is selected in Step 4.
6.
Input the Bank ID if [2] is selected in Step 4.
7.
Input the Bank ID if [3] is selected in Step 4.
HOST PARAMS:
1. Host Parameters
2. Host Phones
3. Print EDC Setup
4. Host URL Params
ENTER PASSWORD:
HOST PARAMS:
1. Merchant ID
2. Bank ID
3. Terminal Type
Terminal Type
MER
SELECT HOST
1. MPSHC
2. MPSGC
Merchant ID
Bank ID
000000