PAX S80 - LAN Parameters

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 210
6.8.7 LAN Parameters
3. Note
All of the parameters that can be set for LAN communication are
sub-menus under the LAN Parameters menu.
STEP
ACTION
DISPLAY
6.
From the Communication Options menu press [7]
for LAN Parameters.
7.
Press [1] to enter the LAN Type menu.
8.
Press [1] for DHCP and press [2] for Static
9.
If [2] Static is selected, new options will show.
10.
Press [2] for IP Address and then input it.
11.
Press [3] for Subnet Mask and then input it.
Comm. Options
4. Connect Timeout
5. Receive Timeout
6. Dial Parameters
7. LAN Parameters
LAN Params:
1. LAN Type
LAN Type: 1
1. DHCP
2. Static
LAN Params:
2. IP Address
3. Subnet Mask
4. Gateway IP
5. DNS IP
_____________________
IP Address
000.000.000.000
_____________________
Subnet Mask
000.000.000.000