PAX S80 - Clear Database

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 192
7.
Terminal goes to the normal steps for a Post Auth transaction.
8.
Stop.
6.7.6.3 Clear Database
Note
It is possible the clear the database for each EDC type individually or all
of them together. Before clearing the database, make sure there are
receipts with the full account number for all of the transactions. If
necessary, run a Journal Report.
For detail about reversal flag, it will also delete if you choose “ALL” in
select PMT Type screen.
Before clearing the database, it is strongly recommended to make sure
there are receipts with the full account number for all of the
transactions. If necessary, run a Journal Report.
STEP
ACTION
DISPLAY
1.
From the System Settings menu, press [5] for Edit
Database.
2.
Input the Password and press [ENTER]
3.
Press [3] for Clear Database
4.
Press [ENTER] to continue
OR
Press [CANCEL] to cancel
SYSTEM OPTIONS:
3. Working Mode
4. Test Mode
5. Pre-Dial Call
6. Database
EDIT DATABASE:
1. Void
2. Post Auth
3. Clear Database
4. Clear Reversal
ARE YOU SURE?
ENTR=YES, CANC=NO
ENTER PASSWORD: