PAX S80 - Buzzer Setup

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 147
6.5.2 Buzzer Setup
Note
This feature enables and disables the terminal’s built-in buzzer, which
sounds a tone when specific functions are performed or buttons are
pressed.
Example: I would like to know when the Menu button is pressed so I
enabled the Buzzer function. The terminal now beeps whenever the
Menu button is pressed.
STEP
ACTION
DISPLAY
1.
From the Operation Settings menu, press [2] for
Buzzer Setup.
2.
Default setting is ON.
Press [1] to disable the buzzer.
OR
Press [2] to enable the buzzer.
3.
Stop.
Buzzer Setting: 2
1. OFF
2. ON
OPER. SETTINGS:
1. No-Paper Mode
2. Buzzer Setup
3. Operation Mode
4. Battery Saver