PAX S80 - Predial Call

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 188
6.7.4 Pre-Dial Call
Note
This feature provides the user options of whether to enable the Pre-Dial
Call function or not. If it is enabled, terminal will make a pre-dial call to
the host.
STEP
ACTION
DISPLAY
1.
From the System Settings menu, press [4] for
Pre-Dial Call.
2.
Scroll through the EDC Type options then press
[ENTER] to select.
OR
Press the number corresponding with your
selection.
3.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
4.
Stop.
PreDial Call
1. Predial OFF
2. Predial ON
3. Predial on SWIPE
SYSTEM OPTIONS:
2. Batch Number
3. Working Mode
4. Pre-Dial Call
5. Database
SELECT PMT TYPE:
1. ALL
2. CREDIT
3. DEBIT
4. EBT