PAX S80 - Communications; Main Communication

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 204
6.7 Communications
This Menu has following sub-menus pertaining to communication. These
parameters affect communications during authorization and batching only.
The following features are part of the Communication Menu:
MENU
DESCRIPTION
 Main Communication
 Backup Comm
 Maximum Tries
 Connect Timeout
 Receive Timeout
 Dial Parameters
 LAN Parameters(for Terminal with LAN)
 Wireless Parameters(for Terminal with Wireless Module)
1.8.1 Main Communication
Note
Use this feature to set the main method of communication. If a method
of communication not supported by the terminal is selected, the error
message “NOT AVAILABLE” is displayed.
STEP
ACTION
DISPLAY
1.
From the Communication Options menu press [1]
for Main Communication.
2.
Use the [▲] & [▼] keys to select the primary
communication type.
3.
Stop
Main Comm.:1
1. LAN
2. Dial
COMM. OPTIONS:
1. Main Communication
2. Backup Comm.
3. Maximum Tries
4. Connect Timeout