PAX S80 - Autodial Setup: 2

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 168
8.
Stop.
6.6.5 AutoDial Setup
Note
The AutoDial function is the automatic execution of the manual batch
process. If the terminal capture type is Host Manual or Terminal
Capture, the AutoDial feature will automatically perform the manual
batch function. AutoDial is not applicable if the terminal capture type is
AutoBatch.
Example: Since I don’t always have time to batch the terminal at the
end of the business day, I set the AutoDial time to automatically batch
out an hour after the store closes.
STEP
ACTION
DISPLAY
1.
From the Hosts Settings menu press [5] to enter
connection settings.
2.
Input the Password and press [ENTER].
3.
Scroll to select the host then press [ENTER].
Note: If the Host is MPSTC, it will display MPSTC.
4.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
5.
If [1] is selected in step 4, enter the start time and
then press [ENTER].
HOST PARAMS:
2. Host Phones
3. Print EDC Setup
4. Host URL Params
5. AutoDial Setup
ENTER PASSWORD:
SELECT HOST
1. MPSHC
2. MPSGC
AUTODIAL SETUP: 2
1. ON
2. OFF
_____________________
START AD AT:
HH:MM
_____________________