PAX S80 - Page 176

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 169
6.
Enter the stop time then press [ENTER]. Stop time
is usually one hour after start time.
7.
Enter the AutoDial time interval then press
[ENTER]. The interval is usually 5 minutes.
8.
Stop.
_____________________
STOP AD AT:
HH:MM
_____________________
_____________________
AD INTERVAL:
_____________________