Chapter 4
How to Do Transaction
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
.
66
4.4.4 Gift Issue
Note
Use the Issue function to issue a gift card.
Example: X wants to buy a Gift Card for a friend from Y’s shop. X goes
to Y’s shop and tells the Clerk that he wants a Gift card issued and the
amount he wants on it. Y will issue a gift card to X. Y does Gift Issue
transaction on S80 and then give the issued card to X.
X-Gift card holder; Y-Merchant of shop
From the Idle prompt use the [SHORTCUT] button
until GIFT is displayed, then press [UP/DOWN] or
[SHORTCUT] button until ISSUE is displayed.
Swipe the gift card or key in the account number manually.
Input the dollar amount of the transaction then
press [ENTER]
This prompt occurs when the Invoice Mode feature
is turned on.
When prompted, enter the invoice No. then press
[ENTER].
This prompt occurs when the Clerk/Server ID
Mode feature is turned on.
When prompted, enter the clerk/server ID then
press [ENTER].
The terminal will contact the Host Processor for an approval and print one
receipt.
Press any key for the second receipt to be printed.
If a second receipt is not wanted, press [CANCEL].
___________________
ENTER CLERK ID:
___________________
TEAR SLIP ---->
Press any Key …
___________________
ENTER INVOICE #:
___________________