PAX S80 - Dial Parameters

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 209
1.8.6 Dial Parameters
2. Note
All of the parameters that can be set for phone line communication
are sub-menus under the Dial Parameters menu.
STEP
ACTION
DISPLAY
1.
From the Communication Options menu press [6]
for Dial Parameters.
2.
Press [1] to enter the Dial Type menu.
OR
Press [2] for Dialing Prefix.
3.
If in Step 2, [1] Dial Type is selected, the Dial Type
menu will be displayed.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
4.
If in Step 2, [2] Dialing Prefix is selected, enter the
Dialing Prefix.
5.
Stop
Comm. Options
4. Connect Timeout
5. Receive Timeout
6. Dial Parameters
7. LAN Parameters
Dial Params:
1. Dial Type
2. Dialing Prefix
Dial Type: 1
1. Tone
2. Pulse
_____________________
Dialing Prefix: