PAX S80 - Set Batch Time

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 134
7.
Stop.
6.4.4 Set Batch Time
Note
This function sets the specific time the terminal prints a batch report and
clears its memory for the next day. Set Batch Time is for Host Based
Auto Batch EDC types only. The Host is not contacted during this
process. Please note the batched transactions are cleared from
memory with the first transaction of the new batch.
Example: The AutoBatch report is printing in the middle of the day. I
accessed the Set Batch Time function and changed the time. Now the
report prints after we have closed for the day.
STEP
ACTION
DISPLAY
1.
From the Merchant Settings menu, press [5] to set
the batch time.
2.
Input the Password and press [ENTER]
3.
Scroll to select the host then press [ENTER].
Note: If the Host is MPSTC, it will display MPSTC.
4.
If AutoBatch is
Then
supported by Host
Proceed to #5,
not supported by Host
Than skip to #7.
ENTER PASSWORD:
MERCHANT PARAMS:
2. Security Settings
3. Edit Header
4. Edit Trailer
5. Set Batch Time
SELECT HOST
1. MPSHC
2. MPSGC