PAX S80 - Host Phones

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 162
8.
Stop.
6.6.2 Host Phones
Note
This function is used for editing host parameters.
STEP
ACTION
DISPLAY
1.
From the Hosts Settings menu press [2] to enter
host phones.
2.
Input the Password and press [ENTER].
3.
Scroll to select the host then press [ENTER].
Note: If the Host is MPSTC, it will display MPSTC.
4.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
5.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
6.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
HOST PARAMS:
1. Host Parameters
2. Host Phones
3. Print EDC Setup
4. Host URL Params
ENTER PASSWORD:
PHONE TYPE:
1. Auth. Phones
2. Batch Phones
SELECT HOST
1. MPSHC
2. MPSGC
PHONE SETTINGS:
1. Number
2. Baud Rate
EDIT PHONE:
1. Phone #1
2. Phone #2
3. Phone #3