PAX S80 - Current Report

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 106
6.3.2 Current Report
Note
This report lists the terminal’s daily transactions in a format that can be
customized. You can choose this report as your default report by saving
it when the terminal asks: “Save as Default?” If yes, press ENTER, if no
then press the CANCEL button.
Example: I want a one-time report of Void transactions only so I printed
a current report selecting VOID as the transaction type. I did not want to
save it as my default report so I pressed CANCEL when prompted.
STEP
ACTION
DISPLAY
1.
From the Reports menu, press [2] to select Current
Report.
2.
Use the [▲] & [▼] keys to scroll through the Report
Type options then press [ENTER] to select.
OR
Press the number corresponding with your
selection.
If Clerk/Server mode is enabled, terminal prompts
all or specific clerk/server. Refer to Step 5.
REPORTS:
1. Default Report
2. Current Report
3. History Report
4. Display Trans.
CUR. REPORT TYPE:
1. Condensed Rprt
2. Short Report
3. Journal Report
4. Totals Only