PAX S80 - Backup Communication

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 205
1.8.2 Backup Communication
Note
Use this feature to set the backup method of communication. If a
method of communication not supported by the terminal is selected, the
error message “NOT AVAILABLE” is displayed.
STEP
ACTION
DISPLAY
1.
From the Communication Options menu press [2]
for Backup Communication.
2.
Default setting is [2] None.
Use the [▲] & [▼] keys to select the primary
communication type.
Note: If in Main Communication menu Dial is
selected, then in this menu the first option is LAN.
3.
Stop
Backup Comm:3
1. Dial
2. None
COMM. OPTIONS:
1. Main Communication
2. Backup Comm.
3. Maximum Tries
4. Connect Timeout