PAX S80 - Page 193

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 186
6.7.3.2.5 V-Code
Note
This feature enables the user to determine how to set up the CVV, CVC
and CID security feature for individual card types or for all card types.
OPTION
DEFINITION
Off
Will not prompt for Code
On if Manual
Will prompt for Code on manual entry transactions(default)
On if Manual, Card
not Present
Will prompt for Code if card is not present
On Always
Will always prompt for Code
STEP
ACTION
DISPLAY
1.
From the Fraud Control menu press [5] for
V-Code.
2.
Select the card type you wish to modify or press [1]
for all card types.
3.
Press the number that corresponds to the desired
CVV Mode.
4.
Stop.
V-Code
1. OFF
2. On if manual
3. OnIfMan.CrdNotPrsnt
4. On always
Select Card Type
1. ALL
2. Visa
3. MasterCard
4. AMEX
Fraud Control
2. AVS On CardPrsnt
3. AVS OnCardNotPrsnt
4. Card Present
5. V-Code