PAX S80 - Page 192

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 185
6.7.3.2.4 Card Present
Note
On manual transactions, different data is required depending upon
whether or not the card is present. This feature sets the option to
assume the card is or is not present or to ask if the card is present.
Example: To be assured that the AVS prompts are always displayed, I
will set the Card Present option to No, if manual.
OPTION
DEFINITION
No, If manual
It is assumed that the card is NOT present on all manual
entry transactions.
Always Yes
It is assumed that the card is always present.
Ask, If manual
The terminal will ask if the card is present on all manual
entry transactions.(default)
STEP
ACTION
DISPLAY
1.
From the Fraud Control menu press [4] to set the
Card Present options.
2.
Select the card type you wish to modify or press [1]
for all card types.
3.
Press the number that corresponds to the desired
Card Present option.
4.
Stop.
Card Present
1. No, if manual
2. Always Yes
3. Ask, if manual
Select Card Type
1. ALL
2. Visa
3. MasterCard
4. AMEX
Fraud Control
1. AVS On Swipe
2. AVS On CardPrsnt
3. AVS OnCardNotPrsnt
4. Card Present