PAX S80 - Page 135

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 128
the terminal. The new password should be a series of eight
non-sequential numbers that can be easily remembered. Using
birthdays or anniversaries is not advised as unauthorized persons
can easily discover these passwords.
If the new User Password is forgotten, you must redownload the
Parameters to re-establish the default password.
STEP
ACTION
DISPLAY
1.
From the Merchant Settings menu press [2] for
Security Settings.
2.
Press [1] for User Password.
3.
Press [ENTER] to change the password.
4.
The password is anything other than the default
password (MMDDYYYY), enter the OLD password
then press [ENTER].
5.
Enter the NEW password then press [ENTER].
Note: The password must be one to sixteen digits in length.
6.
Re-enter the NEW password then press [ENTER].
7.
Stop.
MERCHANT PARAMS:
1. Authorizations
2. Security Settings
3. Edit Header
4. Edit Trailer
SECURITY SWITCH:
1. User Password
2. Batch
3. Secure Card
REENTER PASSWORD
****************
ENTER PASSWORD:
****************
Change Password?
ENTR=YES, CANC=NO
Old Password: