PAX S80 - Page 24

Chapter 4
How to Do Transaction
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 17
6.
This prompt occurs when the Table Mode feature
is turned on.
When prompted, enter the table number then
press [ENTER].
7.
This prompt occurs when the Guest No. Mode
feature is turned on.
When prompted, enter the number of guests then
press [ENTER].
8.
If the account number was manually entered, the terminal will ask if the card
is present. Depending on the user’s response the terminal will prompt for
V-code and other AVS settings*.
* Dependent upon Fraud Control settings.
9.
This is a feature of Commercial Cards.
Enter the additional information required for
commercial cards then press [ENTER].
10.
When prompted, enter the TAX Amount then
press [ENTER].
11.
Press any key for the second receipt to be printed.
If a second receipt is not wanted, press
[CANCEL].
12.
Press [ENTER] for no receipt.
OR
Press [CANCEL] to print the second receipt.
13.
Stop.
TAX Amount
AMOUNT 0.00
ARE YOU SURE?
ENTR=YES, CANC=NO
___________________
ENTER TABLE NO:
___________________
___________________
NUMBER OF GUESTS
___________________
_________________
Cust. Code?
_________________
_________________
TEAR SLIP ---->
Press any Key …