Chapter 4
How to Do Transaction
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
.
36
The terminal searches the database for a Forced transaction that matches
the criteria. Once found, the terminal processes the transaction.
If the terminal does not find the transaction, it displays “TRANS NOT
FOUND!” and reverts back to the main screen.
View the transaction on the display to verify it is the
correct transaction then
Press [ENTER]
This prompt only occurs when the Clerk/Server ID
Mode feature is turned on. When prompted, enter
the clerk/server ID then press [ENTER].
Press any key for the second receipt to be printed.
If a second receipt is not wanted, press [CANCEL].
Press [ENTER] for no receipt.
OR
Press [CANCEL] to print the second receipt.
#0001 POST
AMT: 2.00
************4996
TEAR SLIP ---->
Press any Key …
___________________
ENTER CLERK ID:
___________________
ARE YOU SURE?
ENTR=YES, CANC=NO
To Next Page
Loading...
