PAX S80 - Page 52

Chapter 4
How to Do Transaction
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 45
7.
This prompt occurs when the Guest No. Mode
feature is turned on.
When prompted, enter the number of guests then
press [ENTER].
8.
Input the PIN on the Keypad then press [ENTER].
9.
The terminal contacts the Host Processor for an approval and prints one
receipt.
10.
Press any key for the second receipt to be printed.
If a second receipt is not wanted, press
[CANCEL].
11.
Press [ENTER] for no receipt.
OR
Press [CANCEL] to print the second receipt.
12.
Stop.
TEAR SLIP ---->
Press any Key …
ARE YOU SURE?
ENTR=YES, CANC=NO
AMT $2.00
Enter PIN:
****
___________________
NUMBER OF GUESTS
___________________