PAX S80 - Page 65

Chapter 4
How to Do Transaction
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 58
4.
Input the dollar amount of the transaction then
press [ENTER].
5.
This prompt occurs when the Invoice Mode feature
is turned on. When prompted, input the invoice
number on the Keypad then press [ENTER].
6.
This prompt occurs when the Clerk/Server ID
Mode feature is turned on. When prompted, input
the Clerk/Server ID on the Keypad then press
[ENTER].
7.
This prompt occurs when the Tip Option feature is
turned on.
Input the amount for tip on the Keypad then press
[ENTER].
8.
The terminal contacts the Host Processor for an approval and prints one
receipt.
9.
Press any key for the second receipt to be printed.
If a second receipt is not wanted, press [CANCEL].
10.
Press [ENTER] for no receipt.
OR
Press [CANCEL] to print the second receipt.
11.
Stop.
__________________
ENTER INVOICE #:
__________________
__________________
ENTER CLERK ID:
__________________
GIFT SALE
AMOUNT 0.00
TEAR SLIP ---->
Press any Key …
ARE YOU SURE?
ENTR=YES, CANC=NO
Enter TIP1:
AMOUNT 0.00