SGM700 Digitizer
Configuration Menu -Eth- -continue-
Increase Decrease Left Right Confirm
When confirmed the following screen will be visible:
In Sub 3 you set the third three numbers of the Subnet
address you want to give the SGM720 (example: 255.255.255.000). Use key 1
and key 2 to change the number Key 1 is for changing the number (1-9), key 2 is
for changing the position of the cursor. Confirm by pressing key 3 >2 sec.
Increase Decrease Left
Right Confirm
When confirmed the following screen will be visible:
In Sub 4 you set the fourth three numbers of the Subnet address you want to give
the SGM720 (example: 255.255.255.000). Use key 1 and key 2 to change the
number Key 1 is for changing the number (1-9), key 2 is for changing the position
of the cursor. Confirm by pressing key 3 >2 sec.
Increase Decrease Left
Right Confirm
When confirmed the following screen will be visible:
44
To Next Page
Loading...
