SGM700 Digitizer
Configuration Menu –232- -continue-
When confirmd the following screen will be vissable:
In 232 2 you set the RS232 address of the SGM750. Press key 2 <2 sec. to enter
232 2 Set the address using key 1 and key 2 confirm by pressing key 3 >2 sec.
(options are: 0-255).
Increase Decrease Left
Right Confirm
When confirmd the following screen will be vissable:
In 232 3 you set the RS232 stopbits of the SGM750. Press key 2 <2 sec. to enter
232 3. Set the number of stopbits the protocol needs by using key 1 and key 2
confirm by pressing key 3 >2 sec. (options are: 1-2).
Increase De- crease Confirm
When confirmd the following screen will be vissable:
53
To Next Page
Loading...
