110
Shooting Functions
4
2
Look through the viewfinder and
press the shutter release button
halfway.
The focus indicator ] appears and you
will hear a beep when the subject comes
into focus. (When blinking, the subject is
not in focus.)
1 Subjects that are difficult to focus on
(p.63)
You can set the camera so that the focusing is performed when the =
button is pressed. Use this setting when autofocus by pressing the shutter
release button halfway is not desired.
1
Select [Enable AF1] or [Enable
AF2] in [9. = Button function] in
the [A Custom Setting 2] menu.
Enable AF1: Auto focusing is performed
using the = button or the
shutter release button.
Enable AF2: Auto focusing is performed
only when the = button is
pressed and not when the shutter release button is
pressed halfway.
Using the = Button to Focus on the Subject
Focus Indicator
9. AF Button function
AF is performed when
the button is pressed
Enable AF1
Enable AF2
Cancel AF
AE Lock
To Next Page
Loading...
Need help?
General
