49
Getting Started
2
Turning the Camera On and Off
1
Move the main switch to [ON].
The camera will turn on.
Move the main switch to [OFF] to turn
off the camera.
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform any operations
within a set period of time. To reactivate the camera after the camera turns
off automatically, turn it on again or perform any of the following.
• Press the shutter release button halfway.
•Press the Q button.
•Press the M button.
•
By default, the camera is set to power off automatically after 1 minute of
inactivity. You can change the setting in [Auto Power Off] in the [
R
Set-up 2]
menu. (p.225)
To Next Page
Loading...
