95
Shooting Functions
4
• Turn the e-dial while pressing the mc button to change the EV
compensation value. (p.104)
• Set the shutter speed in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps]
in the [A Custom Setting 1] menu. (p.105)
• You can automatically correct the sensitivity if appropriate exposure cannot
be set with the set criteria.
Set [Sensitivity] to [AUTO]. (p.87)
• When using a lens with an aperture ring,
set the aperture to the s position while
holding down the auto-lock button on the
lens.
Exposure Warning
If the subject is too bright or too dark,
the aperture value will blink in the
viewfinder. If the subject is too bright,
choose a faster shutter speed. If it is too
dark, choose a slower shutter speed. When the aperture value
indication stops blinking, you can take a picture with proper exposure.
Use an optional ND (Neutral Density) filter if the subject is too bright.
Use a flash if it is too dark.
To Next Page
Loading...
Need help?
General
