Before Using Your Camera
1
19
1 g (Help) button
Displays an explanation of the
function or operation on the
monitor. (p.34)
You can also assign other
functions to this button.
(p.154)
2 Shutter release button
Press to capture images.
(p.62)
3 Main switch
Move to turn the power on/off.
(p.49)
4 Lens unlock button
Press to detach lens. (p.47)
5 mc button
Sets the EV compensation
and aperture values. (p.91,
p.98, p.104)
6 Mode dial
Changes Capture mode.
(p.80)
7 Focus mode lever
Switches between autofocus
mode (p.109) and manual
focus mode (p.116).
8 K button
Press to pop up the built-in
flash. (p.65)
9 e-dial
Sets the shutter speed,
aperture, sensitivity and EV
compensation values.
0 = button
You can select the function of
this button either to focus on
the target or to memorize the
exposure value. (p.100, p.105,
p.110)
a Q button
Switches to Playback mode.
(p.72, p.166)
b M button
Turns the status screen
display on the monitor on/off.
(p.23)
c 3 button
Displays the [A Rec. Mode 1]
menu (p.77). Next, press the
four-way controller (5) to
display other menus.
d 4 button
Displays the control panel
(p.23). When the control panel
or a menu screen is displayed,
press the button to confirm the
selected item.
e Four-way controller
(2345)
Opens the Drive Mode/Flash
Mode/White Balance/
Sensitivity setup menu (p.76).
When the control panel or a
menu screen is displayed, use
this to move the cursor or
change items.
To Next Page
Loading...
