Pentax K-m/K2000 - Functions Available with Various Lens Combinations

240
Appendix
12
Functions Available with Various
Lens Combinations
Lenses that can be used with this camera
Only DA, DA L and FA J lenses and D FA/FA/F/A lenses having an s
(Auto) position on the aperture ring can be used with factory default
settings. Refer to “Notes on [19. Using Aperture Ring]” (p.241) for other
lenses and D FA/FA/F/A lenses with aperture ring set to a position other
than s.
Yes : Functions are available when the aperture ring is set to the s position.
No : Functions are unavailable.
*1 Lenses with a maximum aperture of f/2.8 or brighter. Only available at s position.
*2 Lenses with a maximum aperture of f/5.6 or brighter.
*3 When using the built-in flash and AF540FGZ, AF360FGZ, AF200FG or AF160FC.
*4 To use an F/FA soft 85 mm f/2.8 lens or FA soft 28 mm f/2.8 lens, set [19. Using aperture
ring] to [Permitted] in the [A Custom Setting 3] menu. Pictures can be taken with the
aperture you set, but only within manual aperture range.
*5 The AF point becomes O (Center).
Lens [Mount type]
Function
DA/DA L/D FA/
FA J/FA lens
[K
AF , K AF2 ]
*4
F lens
[K
AF]
*4
A lens
[K
A]
Autofocus (Lens only) Yes Yes —
(With AF adapter 1.7×)
*1
—— Yes
*5
Manual focus
(With the focus indicator)
*2
Yes Yes Yes
(With Matte field) Yes Yes Yes
Five AF points Yes Yes No
*5
Power zoom No — —
Aperture Priority Automatic Exposure Yes Yes Yes
Shutter Priority Automatic Exposure Yes Yes Yes
Manual Exposure Yes Yes Yes
P-TTL Auto Flash
*3
Yes Yes Yes
Multi (16-segment) metering Yes Yes Yes
Automatic lens focal length acquirement
when using the Shake Reduction
function
Yes Yes No