Pentax K-m/K2000 - Camera Settings

209
Printing from the Camera
9
1 Use the four-way controller (23) to select [DPOF
AUTOPRINT] in the PictBridge menu.
2 Press the 4 button.
The print with DPOF settings screen
appears.
Use the four-way controller (45) to
check the number of copies for each
image, whether the date is imprinted or
not, and total number of copies.
3 Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 to 10 of p.207 for details on how to change the settings.
4 Use the four-way controller (23) to select [Printing
starts] and press the 4 button.
The images are printed according to the settings.
Press the 3 button to cancel printing.
Disconnect the USB cable from the camera and printer when you have
finished printing.
1 Turn off the camera.
2 Disconnect the USB cable from the camera and printer.
Printing Images Using the DPOF Settings
Disconnecting the USB Cable
1
10
10
P r i n t wi th D PO F se tt in gs
Print with DPOF settings
1
10
MENU
OK
100-0046
100 - 00 46
100-0046
P r i n t
Print
D a t e
Date
C o p i e s
Copies
To t a l
Total