67
Basic Operations
3
1
Set the mode dial to H, I, =, q or ..
The flash is deactivated when A (Night Scene), K (Sunset), n (Stage
Lighting), m (Candlelight) or E (Museum) is selected in H (Scene)
mode. The flash does not pop up automatically when set to l (Night
Snap) in H (Scene) mode.
2
Press the shutter release button
halfway.
The built-in flash pops up if necessary
and begins charging. When the flash is
fully charged, b appears in the
viewfinder. (p.28)
3
Press the shutter release button fully.
The picture is taken.
4
Push down on the portion
indicated in the illustration to
retract the flash.
Using Auto Discharge
g
,
i
(Automatic Flash Popup)
Switch between Auto discharge mode and Flash On mode by pressing the
K button while the built-in flash is popped up.
To Next Page
Loading...
