79
2
Taking Pictures
3
Press the shutter release button to take a
shot.
The first captured image is temporarily saved, and
the shooting screen for the second image is
displayed.
4
Take the second image.
Overlap the image on the preview guide on the left of the screen to
compose the second image (right half of picture). Repeat Step 3 to
take the second image.
The stitched first and second image appears on the display (Instant
Review), and then is saved.
1
When the shooting screen for the second image is
displayed in Step 4 on p.79, press the 4 button or the
four-way controller (3).
A confirmation dialog appears.
2
Use the four-way controller (23) to select an option,
and press the 4 button.
• To minimize distortion when taking the second image, turn the camera
so that it pivots around the right edge of the preview guide on the
screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Detection function (p.107) is set to [On], it works only
when taking the first shot.
• The composite image is saved with the pixel size of f.
To Cancel after Taking the First Shot
Save Saves the first image and you can retake the first shot. The first
image is saved in h.
Discard Discards the first image and you can retake the first shot.
2
2
Exit
To Next Page
Loading...
Need help?
General
