Pentax OPTIO VS20 User Manual

21
Normal Display in Still Picture Capture Mode
* 6 and 7 appear only when the shutter release button is pressed halfway.
* As to 10, when the focus mode is set to = and the Auto-Macro
function is activated, the q appears on the display (p.99).
* Some indications may not appear depending on the shooting mode.
1 Shooting mode (p.67) 11
Digital Zoom/Intelligent Zoom icon
(p.74)
2 Face Detection icon (p.69)
3 Tilt icon (p.119) 12 Memory status (p.40)
4 D-range setting icon (p.108) 13 Remaining image storage capacity
5 Shake Reduction icon (p.112) 14 Battery level indicator (p.34)
6 Shutter speed 15 Focus frame (p.64)
7 Aperture 16 Date and time (p.46)
8 Flash mode (p.97) 17 EV Compensation (p.107)
9 Drive mode (p.90) 18 Date Imprint setting (p.118)
10 Focus mode (p.99) 19 World time setting (p.181)
Switching the Display for Shooting between Vertical and
Horizontal Orientation
When you hold the camera vertically for shooting a still picture, the display is
automatically switched to vertical orientation.
• When you hold the camera horizontally, you cannot use the shutter release button/
zoom lever for vertical shooting.
• While you are recording movies and playing back still pictures/movies, the display
is not switched to vertical orientation.
F5.6
1/250
F5.6
1/250
14:25
14:25+1.0+1.0
3838
0 2 / 02 /2 01 2
02/02/2012
F3.5F3.5
1/250
1/250
16
191817
1
11
10
13
14
15
12
6
7
98
2
3
4
5
F5.6
1/250
F5.6
1/250
14:25
14:25
+1.0
+1.0
3838
0 2 / 02 /2 01 2
02/02/2012
F3.5F3.5
1/250
1/250
16
1918
17
1
10
15
2
3
131298
4
6
7
5
14
11
Horizontal display Vertical display

Pentax OPTIO VS20 Specifications

General

Brand	Pentax
Model	OPTIO VS20
Category	Digital Camera
Language	English