Disposal
12
4 Disposal
4.01 Environmental protection
Careless disposal of the machine and its components may lead to environmental pollution.
O The materials used for the machine are steel, aluminium, brass and various plastic
materials. The electrical equipment comprises plastic materials and copper.
O Dismantle assemblies into individual components.
O Dispose of the components in a proper and environmentally friendly manner while
adhering to all statutory and operational regulations.
O The machine is to be disposed of according to the locally valid pollution control regula-
tions; if necessary, a specialist ist to be commissioned.
Care must be taken that parts soiled with lubricants are disposed of separately
according to the locally valid pollution control regulations!
The final decommissioning and disposal requires a complete disconnection of the entire
power supply, the dismantling of the mechanical components and the disposal of the media
that may remain in the machine.
All safety and environmental aspects must be taken into consideration when dismantling
and disposing of the machine.
Risk of environmental damage!
O Observe the applicable national and regional regulations and the
manufacturer's instructions when disposing of the machine.
O Segregate the different operating and auxiliary materials and dispose of
them in a proper manner.
Risk of fatal injury from electric shock!
O Disconnect the power supply when carrying out the dismantling and
disconnection work.
O Work to disconnect the electrical components must only be carried out by
qualified electricians.
Risk of uncontrolled machine movements!
Sufficient energy reserves remain in various supply systems (e.g. electrics,
electronics, pneumatics) after disconnecting the power supply (emergency stop
switch) that could have dangerous consequences in the case of intervention by
an unqualified person.
O Make sure that the EMERGENCY STOP switch and the compressed air are
switched off.
To Next Page
Loading...