Maintenance and Care
82
Fig. 12 - 02
Check the air pressure .........................................................................daily, before start-up
Clean the air filter of the maintenance unit .........................................................as required
Clean the feed rollers ..........................................................................................as required
12 Care and Maintenance
12.01 Maintenance intervals
12.02 Cleaning the feed rollers
O When necessary, remove any sealing
residues left on the top and bottom feed
rollers 1 and 2.
2
1
During all cleaning work the machine must be disconnected from the power
supply by switching off the main switch or pulling out the plug!
Danger of injury if the machine is started accidentally!
To Next Page
Loading...