Set-up
24
9.02 Selecting operating modes
A difference is made between the production and input modes on the Pfaff 8311.
The production mode is used for producing and is subdivided into the
-Manual sealing, see chapter 10.05.
-Dynamic sealing, see chapter 10.06.
-Programmed sealing, see chapter 10.07.
-Programmed dynamic sealing, see chapter 10.08.
-Programmed sealing with sequence program. see chapter 10.09.
The sealing process can be controlled using the main pedal or via the touch panel.
The input mode is used to enter values and settings and offers assistance with
troubleshooting on the machine and various additional functions, see chapter 11 Input.
To Next Page
Loading...