Proper use
9
2 Proper use
2.01 General
The PFAFF 8311 is available in three versions. The individual versions are described below,
see Chapter 2.02 Machine versions. All the machine versions are used for continuous sea-
ling of thin, thermoplastic materials, such as e.g. fleeces, felts, woven and knitted fabrics
using ultrasonics.
Any use of these machines which is not approved by the manufacturer shall be
considered as improper use! The manufacturer shall not be liable for any damage
arising out of improper use! Proper use shall also be considered to include com-
pliance with the operation, adjustment, service and repair measures specified by
the manufacturer!
Fig. 2 - 01
2.02 Machine versions
2
.02.01 8311 Standard
901-8311-001/001
Welding application
65 mm anvil wheel, 104 mm Sonotrode (10
mm wide), titanium knurling.
901-8311-005/001
Welding or Cut&Seal application
65 mm anvil wheel, 113 mm Sonotrode (10
mm wide), titanium knurling.
To Next Page
Loading...