Controls
16
Fig. 7 - 03
7.03 Pedal
Foot switch functions
0 = Rest position (welding stops)
+1 = Transport roller is lowered to welding
position.
+2 = Press and hold treadle:
Welding process begins and runs as
long as the treadle is pressed.
-1 = Lift transport roller
The function method of the
pedal depends on the selected
pedal mode (level or flip-flop
mode)
7.02 Main switch
O The machine is switched on or off by
turning main switch 1.
Position "0": Machine is switched off
Position "I": Machine is switched on
+1
0
-1
+2
Fig. 7 - 02
1
To Next Page
Loading...