Safety
6
1.03 Safety symbols
Hazard point!
Special points of attention
Danger of hands being crushed!
Danger of burns from hot surface!
Fatal danger from electric voltage.
Caution!
Do not operate without finger guard and safety covers!
Turn off the main switch and let the machine cool
down before any set-up, maintenance and cleaning
work!
1.04 Special points of attention for the owner-operator
O This instruction manual is a part of the machine and must be made available to the
operating personnel at all times.
O The instruction manual must have been read before the initial start-up.
O The operating personnel and technical staff must be instructed about the machine's
safety covers and about safe working methods.
O The owner-operator may only operate the machine in a flawless condition.
O The owner-operator must ensure that no safety covers are removed or disabled.
O The owner-operator must ensure that only authorised persons work on the machine.
O The owner-operator must make sure there is no high-frequency sealing equipment being
operated in direct proximity to the machine that exceeds the EMC limit values for the
machine according to EN 60204-31.
Additional information can be requested from the responsible sales centre.
To Next Page
Loading...