Adjustment
93
Should a software update be essential for whatever reason, tap on the touch panel when
switching on the machine. The boot loader then appears with the same software version.
If the software update on the SD card is incomplete or faulty, the update process is
cancelled without changing the previously programmed software. In addition, no settings
and sealing parameters are changed.
It should go without saying that the machine must not be switched off during the software
update. However, if the power fails during the update, the boot loader detects the faulty
programming and prevents the machine starting up until the update has been successfully
repeated.
ATTENTION:
The boot loader is activated when the versions of programmed software and the software
on the SD card are different. It is therefore also activated when an SD card is inserted with
an older version of software.
To Next Page
Loading...