7.7.1 Navigation 32
7.7.2 Main screen (Home) 33
7.7.3 Graph screen 34
7.7.4 Graph screen: graph parameters 37
7.7.5 Graph screen: recording 38
7.7.6 Graph screen: graph history 38
7.7.7 Graph screen: save and delete 38
7.7.8 Graph screen: display 39
7.7.9 Details of a measurement 41
7.7.10Zoom function 41
7.7.11Function key bar 42
8 Settings menu 46
8.1 Measurement menu 47
8.1.1 Tracer gas 47
8.1.2 Set points 47
8.1.3 Correction factor 49
8.1.4 Calibrated leak settings 51
8.1.5 Target value 52
8.2 Test menu 53
8.2.1 Test method 53
8.2.2 Test mode 53
8.2.3 Type of probe 54
8.2.4 Cycle end 54
8.2.5 Inlet vent 55
8.2.6 Memo Function 56
8.2.7 Zero activation 56
8.2.8 Regeneration 57
8.2.9 Massive Mode 58
8.2.10Calibration check 58
8.2.11Calibration function 59
8.2.12Start-up time delay 59
8.3 Configuration menu 60
8.3.1 Unit - Date - Time - Language 60
8.3.2 Sound volume 61
8.3.3 Function keys 62
8.3.4 Screen settings 62
8.3.5 Access - Password 63
8.4 Maintenance menu 65
8.4.1 History 65
8.4.2 Information 67
8.4.3 Last maintenance operations 70
8.4.4 Counters before next maintenance 70
8.4.5 Maintenance turbo pump and cell 70
8.4.6 Burn-in 71
8.4.7 Internal Pirani gauge calibration 71
8.4.8 Saving/Loading of the detector parameters 72
8.5 File Manager menu 72
8.6 Advanced menu 74
8.6.1 Input/Output 74
8.6.2 Service 75
9 Maintenance/Replacement 76
10 Accessories 77
11 Technical data and dimensions 78
11.1 General 78
11.2 Technical characteristics 78
11.3 Units of pressure 79
Table of contents
4/98
To Next Page
Loading...
