Access: Menu [Configuration] [Access/Password] + password
Choice - Setting limit
1)
User level To be selected
3 user levels can be used to restrict the display and access to settings
and functions.
See details below
Restricted access
Medium access
Full access
Password To be set
This function is used to block access to one or more Settings menus. To
access a locked menu, the user will be asked to provide the password.
-
Customized access To be set
Access to certain items may be permitted or prohibited.
See details below
-
1) Initial setting: see chapter “Tree diagram to the Settings menu”
User level and customized access
The rights defined in the 2 tables below are the default rights for each user level.
These rights can be customized: they can be assigned/withdrawn (see chapter "Access - Password").
User level
Restricted access Medium access Full access
START/STOP,
CAL, ZERO but-
tons
Invalid
No settings can be made without a password
Valid
6 setting menus Invalid
No setting possible without a password (temporary access allowed)
Valid
Function keys ● Hidden except for [VENT] and [MUTE]
● Displayed if padlock removed (customized access)
Displayed
Temporary access to a locked menu
To access a locked menu, the user is asked to provide the password.
Temporary access: after returning to the main screen, the menu is once again locked.
1. Access the Settings menu
2. Press [Configuration] [Access/Password].
3. Enter password.
Access to the graph screen, menus and locked functions
Access to the following items may be permitted or prohibited:
●
graph screen
●
settings menus: Measurement, Test, Configuration, Maintenance, File Manager and Advanced
●
function keys: [AUDIO], [COR.], [MUTE], [REJECT POINT], [INFOR.], [TIMER] and [TRACER
GAS]
1. Access the menu [Access/Password].
2. Press [Configuration] [Access/Password] + password + [Customized access].
3. Press the padlock to lock/unlock.
●
The presence of an open green padlock indicates that access to the item is permitted (un-
locked).
●
The presence of a closed red padlock indicates that access to the item is prohibited (locked).
Customizing user levels
Depending on the user level, access to the following items may be permitted or prohibited:
●
graph screen
●
settings menus: Measurement, Test, Configuration, Maintenance, File Manager and Advanced
●
function keys: [AUDIO], [COR.], [MUTE], [REJECT POINT], [INFOR.], [TIMER] and [TRACER
GAS]
It is possible to customize the rights for each user level.
1. Select the user level to customize.
2. Press [Configuration] [Access/Password] + password + [Customized access].
Settings menu
64/98
To Next Page
Loading...
