Mode Description
RC 500 WL Use of a wireless remote control (model RC 500 WL).
5 V power supply available.
RC 500 Use of a wired remote control (model RC 500).
24 V power supply available
HLT 5xx Protocol for compatibility with the HLT 5xx detector protocol.
5 V power supply available.
List of orders for the protocol compatible.
To refer to Operating instructions - RS-232 Serial link (see chapter “Applicable docu-
ments”).
HLT 2xx Protocol for compatibility with the HLT 2xx.detector protocol.
5 V power supply available.
List of orders for the protocol compatible.
To refer to Operating instructions - RS-232 Serial link (see chapter “Applicable docu-
ments”).
Module Ext. Full control of the detector by a supervisor.
The detector sends information at the supervisor's request.
24 V power supply available
A 24 V power supply is required for using an external module (example: profi-
bus).
Appendix
95/98
To Next Page
Loading...
