PIAGGIO MP3 400 i.e. - Page 133

- Remove the washer.
- Insert the nut again so as to slightly uncover the
shaft and free the space that was occupied by the
washer.
CAUTION
THIS OPERATION IS REQUIRED AS THE FLY-
WHEEL IS STRONGLY LOCKED; THE CONE
DETACHMENT MAY THEREFORE CAUSE THE
ROTOR SLIPPAGE, WITH THE CONSEQUENT
BREAKAGE OF THE MAGNETS.
- Insert the special removing tool.
- Using a 27-mm wrench and a 19-mm bushing,
release the flywheel.
Specific tooling
020467Y Flywheel extractor
- Remove the extractor.
- Remove the nut and extract the flywheel with the
start-up rim.
- Remove the crankshaft key.
MP3 400 i.e. Engine
ENG - 41