PIAGGIO MP3 400 i.e. - Before Removing the Geared Motor

Hold the crankcase in a perfectly horizontal posi-
tion, heat it with a specific heat gun at a tempera-
ture of about 120 °C, use the specific tool to fit the
bearing of the electric motor. Hit slightly with a
mallet if necessary.
Specific tooling
020363Y 20 mm guide
020151Y Air heater
020376Y Adaptor handle
020477Y Adaptor 37 mm
Before removing the geared motor:
Disable the suspension lock.
- Remove the front shield.
With the set nut indicated in the photograph, re-
move the tensioning cable of the suspension lock-
ing mechanical calliper.
Remove the electrical connection of the geared
motor position potentiometer.
Remove the electrical connection of the geared
motor electric motor.
Suspensions MP3 400 i.e.
SUSP - 26