PIAGGIO MP3 400 i.e. - Tilt Locking Calliper Sensor

1: TILT LOCKING CALLIPER SENSOR
The tilt locking calliper sensor is a normally opened
switch. Check its correct operation with a multi-
meter.
With interface wiring disconnected from the control
unit, check the continuity between pin 34 and the
brown cable of the tilt locking gripper sensor con-
nector on the system side.
Check the continuity of the connector black cable
and an earth point on the chassis
Suspensions MP3 400 i.e.
SUSP - 36