Check the continuity of the yellow-red cable be-
tween the pressure switch connector and the fuse
box (7.5A fuse No. 11) and between the remote
control base and the fuse box (7.5A fuse No. 11).
With a multimeter, also check the pressure switch
operation as well as the continuity at rest as this is
normally closed switch.
Wheel alignment
Tool fitting
How to use the tools
•
Check that tyre pressure is correct.
•
Park the vehicle on level, smooth and
even ground.
•
Rest the vehicle on its centre stand.
•
Make sure that the parking system is
disengaged.
•
Lift the front wheels as shown in the
photograph
MP3 400 i.e. Suspensions
SUSP - 41
To Next Page
Loading...
Need help?
General