PIAGGIO MP3 400 i.e. - Page 175

- Fit the seeger ring.
- Before installing the new bearing on the trans-
mission side crankcase, heat the seat using the
special tool.
Specific tooling
020151Y Air heater
- Insert a new bearing on the special tool after
greasing the guide seat.
- Install the new bearing on the engine crankcase
using the special tool.
N.B.
IF A BEARING WITH PLASTIC CAGE IS USED,
KEEP THE BALLS VISIBLE FROM THE
CRANKCASE INTERNAL SIDE.
Specific tooling
020376Y Adaptor handle
020359Y 42x47-mm adaptor
020439Y 17 mm guide
MP3 400 i.e. Engine
ENG - 83